- Which topology is most widely used?
- Where is star topology used?
- What is star bus topology?
- Which topology is faster?
- Which topology is the cheapest?
- What is star topology with example?
- Why mesh topology is the best?
- Which topology is expensive?
- Is star topology faster than mesh topology?
- How many topology are there?
- Which topology is best for university?
- Which topology is best for LAN?
- Which topology is best and why?
- Which network topology is the most secure?
- Which topology is difficult to expand?
Which topology is most widely used?
Star TopologyWhat Is Star Topology.
A star topology, the most common network topology, is laid out so every node in the network is directly connected to one central hub via coaxial, twisted-pair, or fiber-optic cable..
Where is star topology used?
Star Network Topology Star network topologies are common in home networks, where the central connection point may be a router, switch, or network hub. Unshielded Twisted Pair (UTP) Ethernet cabling is typically used to connect devices to the hub, though coaxial cable or optical fiber may also be employed.
What is star bus topology?
Star Bus is a networking topology in which hubs for workgroups or departmental local area networks (LANs) are connected by using a network bus to form a single network. Star bus topology is a combination of star topology superimposed on a backbone bus topology. … Crossover cables for regular (host) ports on the hub.
Which topology is faster?
star topologyData transmission is faster in star topology. In Bus topology the data is transmitted slower as compared to star topology.
Which topology is the cheapest?
The star and extended star are the most popular topologies for Ethernet networks. This type network is easy to setup, relatively inexpensive, and provides more redundancy than other topologies, i.e. bus topology. The star topology is configured by connecting all of the nodes on the network to central device.
What is star topology with example?
A star topology is a topology for a Local Area Network (LAN) in which all nodes are individually connected to a central connection point, like a hub or a switch. A star takes more cable than e.g. a bus, but the benefit is that if a cable fails, only one node will be brought down. Star topology.
Why mesh topology is the best?
The primary advantage of mesh topology is that it has low transmit power and shorter links (< 100 ft), which allows for a fairly long battery life and enables you to move a lot of data around the network. The primary disadvantage of mesh topology is that the range between two mesh nodes is quite limited.
Which topology is expensive?
Star topologyStar topology is the most popular way to connect a computer in a workgroup. It is expensive due to the cost of the hub. Star topology uses a lot of cables, which makes it the most costly network to set up as you also have to trunk to keep the cables out of harm.
Is star topology faster than mesh topology?
The Star topology organises the nodes in a star shape where the central hub is connected to all the other nodes. On the other hand, in the mesh configuration, each node is connected to the other node. … On the contrary, the mesh topology is more robust than the star topology.
How many topology are there?
five typesGeometric representation of how the computers are connected to each other is known as topology. There are five types of topology – Mesh, Star, Bus, Ring and Hybrid.
Which topology is best for university?
There are many types of the network topologies: bus, star, ring, mesh topology, but the most popular is the hybrid topology.
Which topology is best for LAN?
Star Star topologyStar topology has become the dominant physical topology for LANs. The star was first popularized by ARCNET, and later adopted by Ethernet. Each node is connected directly to a central device such as a hub or a switch, as shown in Figure 5.17.
Which topology is best and why?
A Star Network Topology is best suited for smaller networks and works efficiently when there is limited number of nodes. One has to ensure that the hub or the central node is always working and extra security features should be added to the hub because it s the heart of the network.
Which network topology is the most secure?
The most reliable network topology is Fully connected.A fully connected network, complete topology, or full mesh topology is a network topology in which there is a direct link between all pairs of nodes.More items…
Which topology is difficult to expand?
mesh topologyA mesh topology requires that every device be connected to every other device on the network. It is, therefore, quite difficult to expand a mesh network.