Question: Is Liquid Chlorine The Same As Shock?

Can you mix liquid chlorine and shock?

While shocking and adding algaecide is effective in getting rid of algae, it should not be done together.

This is because when you mix chlorine and algaecide together, it renders both of them useless.

Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM..

Can you use bleach instead of chlorine?

The solution to maintaining a clear pool is to use readily available liquid bleach as your chlorine source. … When you add your chlorine this way, however, you will need to add a small amount of stabilizer to your pool so the sunlight doesn’t destroy all of your chlorine the instant you add it in.

How long does it take chlorine to kill algae?

Give the shock a good 12 to 24 hours to work it’s magic. If the algae hasn’t cleared up after 24-48 hours, clean and brush the pool and add another shock treatment.

How long after adding liquid chlorine can you swim?

about 4 hoursDepending on how much you have added and the size of your pool, it is generally safe to wait about 4 hours after adding liquid chlorine or until levels reach 5 ppm or lower.

What is the best liquid chlorine for pools?

Unstabilized chlorine is the best choice for indoor pools or pools where there isn’t too much exposure to the sun, such as heavily shaded or covered areas. You would also use unstabilized chlorine to give your pool a shock treatment, since you don’t want the chlorine levels to stay high for too long.

How long does it take for liquid chlorine to kill algae?

3 daysUse chlorine as your go-to algae killer. This usually works within 1–3 days, but can take up to a week if pool conditions are poor.

How much liquid chlorine do I put in a 20000 gallon pool?

The most important factor though is the size of the pool. You’ll need about 52-104 oz of liquid chlorine per 10,000 gallons of water. This amount should get the chlorine level to between 5 and 10 ppm.

Does liquid chlorine raise pH?

Liquid chlorine does not raise pH. When added to water, liquid chlorine (which has a pH of 13) makes HOCl (hypochlorous acid – the killing form of chlorine) and NaOH (sodium hydroxide), which raises pH. … So the net effect on pH is zero (or almost zero).

How long is liquid chlorine good for?

Liquid pool chemicals, on the other hand, tend to have a shorter shelf life. For example, dry pool chlorine will not expire for a long time, while liquid pool chlorine will expire quickly. If you have any pool chemicals in liquid form, they will only last up to two months before they begin to become ineffective.

Will Liquid chlorine clear a green pool?

This is the main event in clearing a green pool—killing the algae. Pool shock contains a high level of chlorine that will kill the algae and sanitize the pool. … Important: Even if you normally use non-chlorine shock, you must use chlorine shock to kill algae.

Can you over shock a pool?

Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you’re using.

How much liquid chlorine do you need to shock a pool?

12.5% Liquid Chlorine Pool Shock – Normal Dosage: 1 gallon of shock per 10,000 gallons of water. Shock Dosage: 2 gallons of shock per 10,000 gallons of water.

Which is better liquid chlorine or powder?

Powdered chlorine is the most typical form of chlorine used in a domestic pool environment. It is typically only slightly more expensive than liquid chlorine but it is much easier to use and has a lower pH, therefore has less impact on your pool’s balance when used.

How much liquid chlorine do you need to shock a pool with algae?

Shocking Treatment for Algae Most of the shock treatment packages will direct you to add 1 lb. (1 bag) of shock per 10,000 gallons of the pool water. This can be fine for any normal conditions.

How often should you put liquid chlorine in the pool?

twice per weekQ: How Often Do I Need to Add Chlorine to Pool? A: During the swimming season, you should check the chlorine level at least twice per week. The ideal chlorine level should be between 1 and 3 ppm.

Should I use liquid chlorine or tablets?

It helps that tablets are cost-effective too and have a long shelf life. On the other hand, if you want to go for a simpler way to sanitize your pool without the side effects of CYA and if hauling around gallons of liquid is no problem, then go for liquid chlorine.

Does shock raise chlorine levels?

Despite how it sounds shocking a pool has nothing to do with electricity or with revealing something completely unexpected. Shocking is the process of adding chemicals (usually chlorine) to your pool to: break apart chloramines, also known as combined chlorine. quickly raise your chlorine level.